Operating instructions

Appendix
212
11
❒ The machine detects paper sizes in the following ways:
• When you place an original in the ADF, an original wider than about 264
mm (10.4") is scanned as A3, 11"×17" size.
An original narrower than about 230 mm (9.1") is sent as 8
1
/
2
"×11" or
8
1
/
2
"×14" size, and an original narrower than about 264 mm (10.4") is
scanned as B4 JIS.
Originals up to 1200 mm (47.2") in length can be scanned.
• See the following table for sizes the machine can detect when you place an
original on the exposure glass. Because the machine scans custom size doc-
uments in a standard size, part of the image may be truncated depending
on the length of the document. For details about how to set custom size
documents, see p.13 “Setting a Scan Area”, Facsimile Reference <Basic Fea-
tures>.
❖ Metric Version
❖ Inch Version
× - Unable to auto detect
*1
Normally a length of about 420 mm (16.5") can be scanned; however, it is only possi-
ble to specify a scanning size up to 432 mm (17").
❖ Maximum scan area
The following shows the maximum scan area:
• Memory Transmission: 297 × 1200 mm/11" × 47" (W × L) from the ADF
• Immediate Transmission: 297 × 1200 mm/11" × 47" (W × L) from the ADF
Note
❒ During Immediate Transmission, the length of the scanning range can
become narrower than 1200 mm (47"), depending on the character size
as well as the settings on the destination machine.
• 297 × 432 mm/11" × 17" (W × L) (from the exposure glass)
Length
*1
-249 mm 249 mm-274 mm 274 mm-316 mm 316 mm-
Width
-243 mm × B5 JISL A4L FL
243 mm-
268 mm
B5 JISK B4 JISL B4 JISL B4 JISL
268 mm- A4K A3L A3L A3L
Length
*1
-9.8" 9.8"-10.8" 10.8"-12.4" 12.4"-
Width
-9.6" × ×
8
1
/
2
"×11"L
FL
9.6"-10.6"
11"×8
1
/
2
"K
11"×17"L 11"×17"L 11"×17"L
10.6"-
11"×8
1
/
2
"K
11"×17"L 11"×17"L 11"×17"L
AdonisC4-AE_Combine-F_FM.book Page 212 Thursday, May 12, 2005 3:15 PM