Operating instructions

Administrator Setting
192
9
Transfer Report
For the Requesting Party to be able to
receive Transfer Result Reports from
the Transfer Station, the Requesting
Party must program the number of
the telephone line that is connected to
their own machine. See p.52 “Trans-
fer Request”.
Be sure to insert a pause after the area
code.
For example, if you are in the United
States and your fax number is 1212-
1234567, program the following:
• 1212-1234567
You can program the fax number for
the G3 line.
Limitation
❒ You cannot program or edit a Transfer
Report when using a line (during
communication). Program or edit
after communication.
Note
❒ You cannot use Transfer Request if
the telephone number of their ma-
chine is not programmed into that
machine.
❒ Up to 16 digits are available for G3.
A Press the {User Tools/Counter} key.
B Press [Facsimile Features].
C Press [Administrator Tools].
D Press [Transfer Report].
E Specify the fax number.
Programming a G3 Fax Number
A Press [G3 Fax No. (Dir.)].
B Enter your facsimile number us-
ing the number keys, and then
press [OK].
Note
❒ If you make a mistake, press
[Clear] or the {Clear/Stop} key,
and then try again.
F Press [Exit].
G Press the {User Tools/Counter} key.
The standby display appears.
Programming a Confidential ID
Program a Confidential ID to print a
Confidential Reception. See p.36
“Printing a Confidential Document”.
Note
❒ If you do not program a Confiden-
tial ID, you cannot receive a Confi-
dential Transmission.
AdonisC4-AE_Combine-F_FM.book Page 192 Thursday, May 12, 2005 3:15 PM