Operating instructions

Sending Scan Files by Scan to Folder
42
3
B Press [Search by Dest. Name].
The soft keyboard appears.
Note
❒ To search by path, press
[Search by Folder Name].
C Enter part of the destination
folder name.
Note
❒ Enter the first character or
characters of the destination
folder name or path.
❒ To search by path, if the des-
tination folder path is
“\\volume\user\folder”,
then enter “\\volume\us-
er\f”.
❒ It is also possible to perform
a combined search using
[Search by Dest. Name] and
[Search by Folder Name].
D Press [OK].
E Select a destination folder.
F Press [Exit].
Checking selected destinations
A Use the destination field at the
top of the screen to check which
destinations are selected.
Note
❒ Press [UPrev.] or [TNext] to
scroll through the list. Desti-
nations are displayed in the
order they were selected.
❒ To check the selected desti-
nations, press the {Check
Modes} key.
H Select the file type if necessary.
A Press [File Name / Type].
B Press [File Type].
C Select the file type.
D Press [OK] twice.
I Specify the file name if necessary.
A Press [File Name / Type].
B Press [File Name].
The soft keyboard appears.
C Enter a file name.
Note
❒ A scan file is given a 21-digit
(excluding the extension) file
name which combines the
time and date the original was
scanned with a 4-digit page
number. (Example : When one
page is scanned in TIFF at
15.10 seconds, 3.30 p.m., 31
December, 2020, the file name
is 202012311530150100001.tif)