Operating instructions

Sending Scan Files by E-mail
22
2
• [Exact Match]: The names
which correspond to an
entered character or char-
acters are targeted.
For example, to search for
“ABC”, enter “ABC”.
• [Include One of Words]: The
names which contain an
entered character or char-
acters are targeted.
For example, to search for
“ABC”, enter “A”, “B”, or
“C”.
•
[ Exclude Words ] : The names
which do not contain an
entered character or char-
acters are targeted.
For example, to search for
“ABC”, enter “D”.
• [Fuzzy Search]: a vague
search (The function of
this vague search depends
on the system supported
by the LDAP server.)
I Press [OK].
Note
❒ The e-mail address searched
for in the LDAP server can-
not be specified correctly if it
contains too many charac-
ters. For details about the
maximum number of charac-
ters that can be entered, see
p.122 “E-mail”.
❒ If a user name and password
for the LDAP server authen-
tication are not set, a log-on
screen appears. Enter a user
name and password.
❒ Multiple e-mail addresses
can be registered for one per-
son, but a search will only
find one e-mail address per
person. Depending on the
LDAP server, the address
which was registered first is
generally found.
❒ To display details about the
destination, press [Details].
J Select a destination.
K Press [Exit].
Note
❒ If you press [ProgDest], a
screen for registering and
changing address book en-
tries appears. Using this
screen, you can register e-
mail addresses directly into
the address book.
Checking selected destinations
A Use the destination field at the
top of the screen to check
which destinations are select-
ed.
Note
❒ Press [UPrev.] or [TNext] to
scroll through the list. Desti-
nations are displayed in the
order they were selected.
❒ To check the selected desti-
nations, press the {Check
Modes} key.
H Select the file type if necessary.
A Press [File Name / Type].
B Press [File Type]
C Select the file type of the file.
D Press [OK] twice.