Printer/Scanner Unit Type 1515 Operating Instructions Printer Reference 2 ***C1-Client-350.tif* Setting Up the Printer Driver and Canceling a Print Job Troubleshooting Printer Features Appendix Read this manual carefully before you use this product and keep it handy for future reference. For safe and correct use, please be sure to read the Safety Information in the "Copy Reference" before using the machine.
Printer/Scanner Unit Type 1515 Operating Instructions Printer Reference 2 EN USA B683-8627
Introduction This manual describes detailed instructions on the operation and notes about the use of this machine. To get maximum versatility from this machine all operators are requested to read this manual carefully and follow the instructions. Please keep this manual in a handy place near the machine. Important Contents of this manual are subject to change without prior notice.
Copyright © 2004
Manuals for This Machine The following manuals describe the operational procedures of this machine. For particular functions, see the relevant parts of the manual. Note Manuals provided are specific to machine type. Adobe Acrobat Reader is necessary to view the manuals as a PDF file.
Manuals for DeskTopBinder V2 Lite DeskTopBinder V2 Lite is a utility included on the CD-ROM labeled “Scanner Driver & Document Management Utilities”. • DeskTopBinder V2 Lite Setup Guide (PDF file - CD-ROM2) Describes installation of, and the operating environment for DeskTopBinder V2 Lite in detail. This guide can be displayed from the [Setup] dialog box when DeskTopBinder V2 Lite is installed.
TABLE OF CONTENTS Manuals for This Machine ......................................................................................i How to Read This Manual .....................................................................................1 1. Setting Up the Printer Driver and Canceling a Print Job Accessing Printer Properties................................................................................3 Windows 95/98/Me - Accessing Printer Properties ....................................................
iv
How to Read This Manual Symbols In this manual, the following symbols are used: R WARNING: This symbol indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury. R CAUTION: This symbol indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury, or damage to property. * The statements above are notes for your safety.
Major Components and Software Major options of this machine are referred to as follows in this manual: • IEEE 1394 Interface Board Type B→ IEEE 1394 interface board • IEEE 802.11b Interface Unit Type D→ IEEE 802.
1. Setting Up the Printer Driver and Canceling a Print Job Accessing Printer Properties Windows 95/98/Me Accessing Printer Properties Changing default settings A On the [Start] menu, point to [Settings], and then click [Printers]. The [Printers] window appears. B Click the icon of the machine whose default you want to change. C On the [File] menu, click [Properties]. The printer properties dialog box appears. D Make the settings you require, and then click [OK].
Setting Up the Printer Driver and Canceling a Print Job 1 Windows 2000/XP and Windows Server 2003 Accessing Printer Properties Note Normally you do not have to change the “Form to Tray Assignment” settings on the [Device Settings] tab in the PostScript 3 printer driver. Changing default settings - Printer properties Settings you make here are used as default for all applications. Limitation Changing machine settings requires Manage Printers permission.
Accessing Printer Properties D Make the settings you require, and then click [OK]. Note Settings you make here are used as default for all applications. Windows NT 4.0 - Accessing Printer Properties 1 Changing default settings - Printer properties Making settings from an application To make settings for a specific application, open the [Print] dialog box from that application.
Setting Up the Printer Driver and Canceling a Print Job Changing the default settings - Default document properties Limitation Changing machine settings requires Full Control access permission. Members of the Administrators, Server Operators, Print Operators, and Power Users groups have Full Control permission by default. When you set up options, log on using an account that has Full Control permission. 1 A On the [Start] menu, point to [Settings], and then click [Printers].
Accessing Printer Properties Macintosh - Setting Up for Printing Making paper settings from an application A Open the file you want to print. B On the [File] menu, click [Page Setup]. The [AdobePS Page Setup] dialog box appears. C Make sure the machine you want Setting up for printing from an application A Open the file you want to print. B On the [File] menu, click [Print]. 1 The [Printer Features] dialog box appears. C Make sure the machine is selected in the [Printer:] box.
Setting Up the Printer Driver and Canceling a Print Job Canceling a Print Job Windows - Canceling a Print Job 1 F Press [Current]. ***PRN002.tif*** A Double-click the printer icon on the Windows taskbar. A window appears, showing all print jobs currently queued for printing. Check the current status of the job you want to cancel. B Select the name of the job you want to cancel. C On • [Current]: cancels the print job currently being processed. • [Resume]: resumes printing jobs.
Canceling a Print Job Macintosh - Canceling a Print Job Mac OS A Double-click the printer icon on the desktop. A window appears, showing all print jobs currently queued for printing. Check the current status of the job you want to cancel. B Select the name of the job you want to cancel. C Click the pause icon, and then click the trash icon. D Press the {Printer} key. E Press [JobReset]. PRN001.tif Note Press [No] to return to the previous display.
Setting Up the Printer Driver and Canceling a Print Job G Press [Current]. PRN002.tif 1 • [Current]: cancels the print job currently being processed. • [Resume]: resumes printing jobs. A confirmation message appears. H Press [Yes] to cancel the print job. PRN003.tif Note Press [No] to return to the previous display. Important If the machine is shared by multiple computers, be careful not to accidentally cancel someone else's print job.
2. Troubleshooting Error & Status Messages on the Display This section describes the principal messages that appear on the display. If a message not described here appears, act according to the message. Reference Before turning the main power off, see ‘Turning On the Power’, Copy Reference. Status messages Message Status Hex Dump Mode In Hex Dump mode, the machine prints received data in hexadecimal format. After printing, turn off the machine and then back on again.
Troubleshooting Alert messages Messages/Second messages Add toner Causes Toner is running out. Solutions It is time to supply toner. Out of toner. Follow instructions inside and replace toner. 2 Change Tray # to the following setings: xxx yyy The settings of the selected pa- Press [JobReset] to change the paper tray settings, or press per tray are different from [FormFeed] to print regardless. those specified for printing. For details about the paper xxx indicates the tray number.
Error & Status Messages on the Display Messages/Second messages Causes Solutions Ethernet Board Error An error has occurred in the Ethernet interface. Exceeded max. print size. The page images to be printed Press [JobReset] to change the exceed the maximum print ar- paper tray settings, or press ea. [FormFeed] to print regardless. Press FormFeed/JobReset Turn off the main power switch, and back on again. If the message appears again, contact your sales or service representative.
Troubleshooting Messages/Second messages Causes Paper Tray is in use. The specified paper tray is in use by another function, such as the copier function. Wait until the other function has finished using the specified paper tray. DToner is almost empty The toner has almost run out. Replace the toner cartridge soon to prevent poor print quality. An error has occurred with the paper tray. # indicates the tray number.
The Machine Does Not Print The Machine Does Not Print Possible Cause Is the power on? Solutions Check the cable is securely plugged into the power outlet and the machine. Turn on the main power switch. Is the machine online? If not, press {fOnline} on the control panel. Does the Printer key stay red? If so, check the error message on the display and take required action.
Troubleshooting Possible Cause Solutions When using wireless LAN, is the LED on the wireless LAN card lit or blinking? Confirm the orange LED is lit, and the green LED is lit or blinks during transmission. Is the wireless LAN being used in ad hoc mode? Turn the main power off and back on. See “Turning On the Power”, Copy Reference. Otherwise, configure [IEEE 802.11b] in [Interface Settings] in [System Settings]. See “Setting Up the Machine on a Network”, Network Guide.
The Machine Does Not Print Problem Is the Data In indicator blinking or lit after starting the print job? Solutions If not, data is not being sent to the machine. When the machine is connected to the computer using the interface cable Check the machine port settings are correct. For parallel port connection, port LPT1 or LPT2 should be set. • Windows 95/98/Me 2 A Click the [Start] button, point to [Settings], and then click [Printers]. B Click the icon of the machine.
Troubleshooting Problem Is the Data In indicator blinking or lit after starting the print job? 2 18 Solutions Network connection Contact your network administrator.
Other Printing Problems Other Printing Problems Problem Causes and Solutions The print on the entire page is faded. If [Toner Saving] is selected on the [Print Quality] tab in the printer driver, the entire page will be faded when printed. Note 2 In PostScript 3, click [Advanced...] on the [Paper/Quality] tab, and then select [Toner Saving 1] or [Toner Saving 2] in [Print Mode] in the [Advanced] dialog box. See the printer driver Help. Smudged print.
Troubleshooting 2 Problem Causes and Solutions When using Windows 95/98/Me, Windows 2000/XP, or Windows NT 4.0, either combined printing or booklet print does not come out as expected. Make sure the application's paper size and orientation settings match those of the printer driver. If a different paper size and orientation are set, select the same size and orientation. When using Windows 95/98/Me, Windows 2000/XP, or Windows NT 4.0, Auto Reduce/Enlarge print does not come out as expected.
Other Printing Problems Problem It takes a long time to complete a print job. Causes and Solutions Photographs and other data intensive pages take a long time for the machine to process, so simply wait when printing such data. Changing the following settings with the printer driver may help speed up printing: • PCL 6/5e Select the lowest value for [Resolution] on the [Print Quality] tab in the printer properties dialog box.
Troubleshooting Problem Causes and Solutions It takes too much time to resume printing. The data is so large or complex that it takes time to process. If the Data In indicator is blinking, data is being processed. Simply wait until printing resumes. The machine was in Energy Saver mode. To resume from Energy Saver mode, it has to warm up, and this takes time. See General Settings Guide. Paper is not fed from the selected tray.
3. Printer Features Reference For more information about copier features and system settings, see Copy Reference and General Settings Guide. Printer Features Menu There are seven menu items in the Printer Features menu: • Paper Input • List/Test Print • Maintenance • System • Host Interface • PCL Menu • PS Menu You can select the functions in the following table: Menu Paper Input Default Bypass Paper Size See p.26 “Paper Input”. List/Test Print Multiple Lists See p.26 “List/Test Print”. Config.
Printer Features Menu Default System Print Error Report See p.31 “System”. Auto Continue Memory Overflow Memory Usage Duplex Copies Edge Smoothing 3 Toner Saving Printer Language Sub Paper Size Page Size Letterhead Setting Edge-Edge Print Default Printer Lang. Host Interface I/O Buffer See p.33 “Host Interface”. I/O Timeout PCL Menu Orientation See p.33 “PCL Menu”. Form Lines Font Source Font Number Point Size Font Pitch Symbol Set Courier Font Ext.
Adjusting Printer Features Adjusting Printer Features Printer Features allows basic adjustment of operations when using the machine as a printer. Although factory default settings are suitable for most printing jobs, Printer Features gives you access to a number of settings that control basic printer operations. Printer Features settings you make are retained even when you turn off the machine. For more information about copier features and system settings, see Copy Reference and General Settings Guide.
Printer Features Printer Features Parameters Paper Input PS Config./Font Page You can print the current configuration of installed PostScript fonts. Bypass Paper Size The size of the paper set in the bypass tray. Hex Dump You can print the Hex Dump. Reference For more information about paper sizes that can be set in the bypass tray, see General Settings Guide. 3 For information about setting paper in the bypass tray, see Printer Reference 1.
Printer Features Parameters Interpreting the configuration page System Reference Unit Number Displays the serial number assigned to the board by its manufacturer. Total Memory Displays the total amount of memory (SDRAM) installed on the printer. 3 Firmware Version • Printer Displays the version number of the printer firmware. • System Displays the version number of the system firmware. • Engine Displays the version number of the printer engine.
Printer Features PCL Menu Displays the settings made under PCL Menu. Reference p.33 “PCL Menu” PS Menu Displays the settings made under PS Menu. 3 Reference p.35 “PS Menu” Host Interface Displays the settings made under the Host Interface menu. When DHCP is active on the network, the actual IP address, subnet mask and gateway address appear in parentheses on the configuration page. Reference p.33 “Host Interface” Interface Information Displays the interface information.
Printer Features Parameters Maintenance C Select [Maintenance] using {U} or {T}, and then press the {OK} key. PRN005.tif Menu Protect This procedure lets you protect menu settings from accidental change. It makes it impossible to change menu settings with normal procedures unless you perform the required key operations. In a network environment, only administrators can make changes to menu settings. • Level 1 You can protect “Maintenance”, ”System”, “Host Interface” and “PCL Menu”.
Printer Features Canceling Menu Protect E Press [Menu Protect]. ***PRN014.tif*** A Press the {User Tools/Counter} key. B Select [Printer Features] using {U} or {T}, and then press the {OK} key. PRN004.tif F Select [Off], and then press the {OK} key. ***PRN015.tif*** 3 C Select [Maintenance] using {U} or {T}, and then press the {OK} key. ***PRN012.tif*** G Press the {User Tools/Counter} key. Temporarily canceling Menu Protect A screen for entering the access codes appears.
Printer Features Parameters System Print Error Report Select this to have an error report printed when a printer or memory error occurs. • On • Off Note Default: Off Auto Continue You can select this to enable Auto Continue. When it is On, printing continues after a system error occurs. • Off • 0 minutes • 1 minute • 5 minutes • 10 minutes • 15 minutes Note Default: Off Memory Overflow Select this to have a memory overflow error report printed.
Printer Features Printer Language Normally, the machine should be set to Auto. If the printer language cannot be detected in Auto, the language specified by Default Printer Lang. is selected. • Auto • PCL • PS Note Default: Auto 3 Sub Paper Size You can enable the Auto Substitute Paper Size (A4↔LT) feature. • Auto • Off Note Default: Off Page Size You can select the default paper size.
Printer Features Parameters Edge-Edge Print Select this to maximize the printable area by minimizing the white space along the edges, to approximately 0.04 inches (1 mm). • Off • On Note Default: Off Default Printer Lang. You can set the default printer language if the machine cannot find the printer language automatically. • PCL • PS Note Default: PCL Host Interface I/O Buffer You can set the size of the I/O Buffer. Normally it is not necessary to change this setting.
Printer Features Font Number You can set the ID of the default font you want to use. • 0 to 50 by 1 Note Default: 0 Point Size You can set the point size you want to use for the selected font. • 4.00 to 999.75 by 0.25 3 Note Default: 12.00 This setting is effective only with variable-space fonts. Font Pitch You can set the number of characters per inch for the selected font. • 0.44 to 99.99 by 0.01 Note Default: 10.00 This setting is effective only with fixed-space fonts.
Printer Features Parameters PS Menu Data Format You can select a data format. • Binary • TBCP Limitation This setting is not effective when operating the machine with a parallel, USB, or EtherTalk connection. 3 When operating the machine with a parallel or USB connection, if binary data is sent from the printer driver, the print job is canceled.
Printer Features 3 36
4. Appendix Collate If you select the collate function on the printer driver, the machine will store print data in memory and automatically collate the printouts. The collate function can be turned on or off from the printer driver. Limitation You cannot use the bypass tray with this function. Collate Outputs can be assembled as sets in sequential order. Cp160-a.
Appendix User Defined Pages Using this function, you can specify the page numbers for each input tray. Reference For printing methods, see the printer driver Help. Limitation This function is available with the PCL printer driver only. If [User Defined Pages] in [Paper Selection:] is selected on the [Paper] tab, [Layout:] cannot be selected. GCPY500E.
System Settings (Parallel Connection) System Settings (Parallel Connection) Interface Settings/Parallel Interface Parallel Timing Specifies the timing for the parallel interface. Normally, you do not need to change this setting. • ACK inside • ACK outside • STB down Note Default: ACK outside Parallel Comm. Speed Specifies the communication speed of the parallel interface. If the speed is too high, data may not be transferred smoothly. If this happens, change the setting to “Standard”.
Appendix Specifications This section contains the machine's electrical and hardware specifications, including information about its options. Component Specifications Resolution PCL 6 : 600 dpi PCL 5e: 300 dpi, 600 dpi RPCS™ : 300 dpi, 600 dpi PostScript 3 : 300 dpi, 600 dpi Interface Standard: • USB 2.0 interface • Ethernet interface (100BASE-TX/10BASE-T) 4 Option: • IEEE 1394 interface • IEEE 802.
Specifications Options Limitation Only one optional interface can be installed in the machine at a time. Therefore, the optional IEEE 1394 interface board, the optional IEEE 802.11b interface unit (wireless LAN board), the optional IEEE 1284 interface board and the optional Bluetooth interface unit cannot be installed concurrently. IEEE 1394 Interface Board Type B Transmission spec.
Appendix IEEE 802.11b Interface Unit Type D Transmission spec.: Based on IEEE 802.11b (wireless LAN) Protocol: TCP/IP, NetBEUI, IPX/SPX, AppleTalk Note SmartDeviceMonitor and Web browser are supported. Data transfer speed: Auto select from below speed 1Mbps, 2Mbps, 5.5Mbps, 11Mbps 4 Frequency range: • Inch version: 2400-2497 MHz (1-11 channels) • Metric version: 2400-2497 MHz (1-13 channels) Transmittable distance: 1Mbps 400 m *1 2Mbps 270 m *1 5.
INDEX B BlueTooth Unit Type 2238, 42 C Canceling a job Macintosh, 9 Windows, 8 Configuration page, 26 Control panel Printer Features, adjusting, 23 D Data In indicator, 17, 21, 22 Display error messages, 11 E Error messages, 11 F Fonts, 40 H Host Interface, 33 O Operating system, 40 Options, 41 P Paper Input, 26 PCL Menu, 33 Printer driver Printer properties, Windows 2000/XP and Windows Server 2003, 4 Printer properties, Windows 95/98/Me, 3 Printer properties, Windows NT 4.
44 EN USA B683-8627
