Operating instructions

Other Printing Problems
41
4
It takes too much
time to complete
print job.
Photographs and other data intensive pages take a long time for the ma-
chine to process, so simply wait when printing such data.
Changing the following settings with the printer driver may help to speed
up printing.
• PCL 6/5e
Select the lowest value for [Resolution] on the [Print Quality] tab in the
printer driver's dialog box.
• PostScript 3
Select the lowest value for [Gradation] on the [Print Quality] tab in the
printer driver's dialog box.
Select “PostScript (optimize for speed)” for PostScript output format on
the [PostScript] tab in the printer driver's dialog box.
• RPCS™
Select the lowest value for [Resolution] on the [Image Adjustments] tab in
the [Change User Settings] dialog box on the [Print Quality] tab in the print-
er driver's dialog box.
Select “Speed” for [Print priority] on [Print Quality] tab in the printer driv-
er's dialog box.
See the printer driver's Help.
The data is so large or complex that it takes time to process. If the Data In
indicator is blinking, data is being processed. Just wait until printing re-
sumes.
If "Warming Up..." appears on the display panel, the machine is warming
up. Wait for a while.
It takes too much
time to resume
printing.
The data is so large or complex that it takes time to process. If the Data In
indicator is blinking, data is being processed. Just wait until printing re-
sumes.
The machine was in Energy Saver mode. To resume from Energy Saver
mode, it has to warm up, and this takes time. To disable Energy Saver
mode, select “Off” for “Energy Saver 1” in the System Settings menu. See
the General Settings Guide.
Paper is not fed
from the selected
tray.
When you are using a Windows operating system, printer driver settings
override those set using the display panel. Set the desired input tray using
the printer driver.
See the printer driver's Help.
Solid lines are
printed as broken
lines.
Make the following settings with the printer driver.
• Change the [Dithering] setting under the [Image Adjustments] tab in the
[Change User Settings] dialog box, under the [Print Quality] tab in the
RPCS™ printer driver's dialog box.
See the printer driver's Help.
Optional compo-
nents connected to
the machine are
not recognized
when using Win-
dows 95/98/Me,
Windows
2000/XP, and
Windows NT 4.0.
You have to configure the option setup in printer properties when bidirec-
tional transmission is not enabled.
See the printer driver's Help.
Status Possible Causes, Descriptions, and Solutions