Service manual

T echnical B ulletin
PAGE: 1/2
Model:
Bellini-C2 Date: 10-Oct-03 No.: RB070028
Subject: Firmware History (Bellini-C2 System) Prepared by: C.Tsuji
From: 2nd Tech Support Sec. Service Support Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Other ( )
This is to inform you of the firmware history for the Bellini-C2 System.
B0705734 Version C.SUM Production
- V1.02.1 - 1st Mass Prod.
A V1.04.2 8C1D February Prod 03’
B V1.04.4 180D March Prod 03’
B0705754
V2.12.7 B6C1 April Prod 03’
A V3.04.1 C258 May Prod 03’
B V4.01.4 EE90 June Prod 03’
C V4.02.1 7065 July Prod 03’
D V.4.03.3 1B79 Sep Prod 03’
Symptom Corrected
Suffix
1. SC672 (controller start-up error).
2. NetWare printing error: Machine will not accept print jobs after a certain amount have been sent via
NetWare.
3. Words missing (French/Spanish): Some words not displayed in French (missing from wording lists).
4. Slow printing speed with Standard TCP/IP port.
IMPORTANT: To ensure the above symptoms do not occur, it is also necessary to update to the
following firmware versions or newer:
! BIOS: B0705742D: K02EL00O
! NIC: B0705735B: V.4.03
! LCDC: B0705371B (NA): V.2.07
B0705372B (EU): V.2.07
Note:
For details, refer to RTB RB070001.
B
1. Supports 0-counter change
2. Supports SMTP Authentication
Note:
For details, refer to RTB RB070003
B0705754
1. Modified for use with Copy Connector Kit.
2. SC997/SC998 occurs with frequent use of New Job.
3. The Printer function is given priority when the Copier is set as the priority function.
4. Modified to further minimize multifeeds for certain paper types.
5. Paper is stacked in shift tray 2 when center stapling is disabled and the job resumed
following a center staple End condition.
A