Service manual

T echnical B ulletin
PAGE: 1/1
Model:
Bellini-C2 Date: 10-Oct-03 No.: RB070027
Subject: Firmware History (Bellini-C2 Netfile) Prepared by: C.Tsuji
From: 2nd Tech Support Sec. Service Support Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Other ( )
This is to inform you of the firmware history for the Bellini-C2 Netfile.
B0705736
Version C.SUM Production
-
V1.01 - 1st Mass Prod.
B0705756
V2.11.3 BF73 April Prod 03’
A
V3.04.2 45DA May Prod 03’
B
V3.07.2 79ED June Prod 03’
D
V.3.08 D929 Sep Prod 03’
Symptom Corrected
Suffix
1st mass production firmware B0705736
1.
Supports 0-counter
change
2. Supports SMTP Authentication
Note:
For details, refer to RTB RB070003.
B0705756
1. Modified for use with Copy Connector Kit.
A
1. Modified for use with the MLB option (File Format Converter).
B
IMPORTANT: To ensure the symptoms below do not occur, it is also necessary to update to the
following firmware versions or newer:
• System Ver. V.4.03.3 (B0705754D)
1. Image data to which a new section has been added, does not appear correctly
after sending the data to the MFP HDD from Desk Top Editor for Production.
2. Excel data set at 1200 dpi does not appear correctly after being retrieved from the
MFP HDD to Desk Top Editor for Production.
3. A device error occurs when sending data that contains Printer document and
Copier document to the MFP HDD from Desk Top Editor for Production.
D