Service manual

T echnical B ulletin
PAGE: 1/1
Model:
Bellini-C2 Date: 20-Aug-03 No.: RB070022
Subject: New SP (SP6903/6120) Prepared by: Y.Urushihara
From: 1st Tech. Support Sec. Service Support Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Other ( )
Please be sure to see the firmware requirements.
1. SP6120
(Staple Jogger Adjustment)
Firmware requirements
The following firmware combinations are required to activate the SP modes:
•
BCU (B0705254A) 4.01.1 or later
• GW (B0705754A) 3.04.1 or later
• EP- ROM (B4685132 or later)