Service manual
T
echnical
B
ulletin
PAGE: 1/2
Reissued: 16-Jul-03
Model:
Bellini-C2
Date:
9-Jul-03
No.:
RB070018b
MB Correction
The items in bold italics have been corrected or added.
Subject:
ROM History for SR840
Prepared by:
M. Matsuda
From:
2nd Tech Support Sec. Service Support Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Other ( )
This is to inform you of the ROM history for the SR840 (VICTORIA-B).
ROM No Main PCB No Version C.SUM Production
B4785103 B4785120 V1.30 5F58 1st Mass Prod.
B4785105 B4785130 V1.373 7EE3 Nov Prod 02’
B4785106 B4785131 V1.382 4684 Dec Prod 02’
B4785107 B4785132 V1.41 ACC8 Dec Prod 02’
B4785108 B4785133 V 1.42 6AAD Mar Prod 03’
B4785109 B4785134 V1.441 97E5 May Prod 03’
B4785110 B4785135 V1.464 3EB0 Aug Prod 03’
Symptom Corrected ROM No
1st mass production firmware B4785103
Supports the one-spot punch unit used on the SR810. B4785105
Stapler moves past the stapling position and does not stop when printing onto 7.25 x 10.5
paper, rear/diagonal stapling.
B4785106
1. Modified for use with the Bellini-C2.
Note:
The 3 previous versions above can only be used with the Martini-C1.
2. Paper exit jam caused by poor paper exit stacking to the stapler tray when the
machine switches back from low to standard engine speed (from line speed 350mm/s
to 450, 500mm/s).
3. Jam occurs when the pre-stack switching solenoid does not switch back to its original
position (Off).
B4785107
Finisher does not come back on line after clearing a cover feeder jam (paper removed,
condition cleared).
B4785108
Machine will not begin printing due to a false tray-full condition triggered after connecting
the Plockmatic SR90 center-stapling booklet maker.
B4785109
1. Exit jam when the machine receives two stapling jobs within 2 seconds of each
other with the following number of sheets, respectively: 4 or more
!
!!
!
3,
3 or more
!
!!
!
2.
Note: This occurs with the Bellini-C2 only.
2. Paper remaining in the staple tray is not detected at power on when the
Plockmatic booklet maker is installed.
B4785110