Service manual

T echnical B ulletin
PAGE: 3/4
Model:
Bellini-C2 Date: 7-Apr-03 No.: RB070001
ACTION REQUIRED
Please perform the firmware upgrade on machines made before March 5th 2003
production. (Refer to the above table for machine cut-in serial numbers.)
!
Controller: B0705734B: V.1.04.4
!
NIC: B0705735B: V.4.03
!
BIOS: B0705742D: K02EL00O
!
LCDC: B0705371B (NA): V.2.07
B0705372B (EU): V.2.07
Note: Please update the above firmware at the same time.
<< Firmware Update Procedure >>
1. Turn the main switch OFF.
2. Insert the SD card into the C3 slot on the right side of the controller box.
3. Turn the main switch ON.
Note:
The machine automatically displays the firmware update screen.
4. Select “Network Support”
, “System”, “Ope Panel. NA(or EU)” and “BIOS” on the
operation panel at the same time.
Note:
With some machines, “BIOS” is not displayed at this point. In this case, continue to
the next step for the first three firmware types, and then repeat the procedure for
BIOS.
Note: NA: USA version, EU: Europe version.