Service manual

T echnical B ulletin
PAGE: 1/1
Model:
Bellini-C2 Date: 9-Jul-03 No.: RB070015
Subject: Firmware History (Bellini-C2 LCDC) Prepared by: M. Matsuda
From: 2nd Tech Support Sec. Service Support Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Other ( )
This is to inform you of the firmware history for the Bellini-C2 LCDC.
B0705371 (NA)
B0705372 (EU)
Version C.SUM Production
A V2.06 - 1st Mass Prod.
B V2.07 851E (NA)
31A3 (EU)
February Prod 03’
B0705374 (NA)
B0705375 (EU)
V2.09 5267 (NA)
C9D1 (EU)
April Prod 03’
A V2.12 1E50 (NA)
544B (EU)
July Prod 03’
Symptom Corrected
Suffix
1. SC672 (controller start-up error).
2. NetWare printing error: The machine will not accept print jobs after a certain amount have been sent
via NetWare.
3. Words missing (French/Spanish): Some words not displayed in French (missing from wording lists).
4. Slow printing speed with Standard TCP/IP port.
IMPORTANT: To ensure the above symptoms do not occur, it is also necessary to update to the
following firmware versions or newer:
! Controller: B0705734B: V.1.04.4
! BIOS: B0705742D: K02EL00O
! NIC: B0705735B: V.4.03
Note: For details, refer to RTB RB070001.
B
1. Supports 0-counter change
2. Supports SMTP Authentication
Note: For details, refer to RTB RB070003.
B0705374
(NA)
B0705375
(EU)
1. Modified for use with the EB-105EX controller (EFI).
A