Service manual

T echnical B ulletin
PAGE: 1/2
Model:
Bellini-C2 Date: 9-Jul-03 No.: RB070009
Subject: Firmware History (Bellini-C2 NCS(NIB)) Prepared by: M. Matsuda
From: 2nd Tech Support Sec. Service Support Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Other ( )
This is to inform you of the firmware history for the Bellini-C2 NCS (NIB).
B0705735
Version C.SUM Production
- V4.01 - 1st Mass Prod.
A V4.02 0CDB February Prod 03’
B V4.03 20B5 March Prod 03’
B0705755 V4.11 AAE6 April Prod 03’
A V4.13.3 6E90 May Prod 03’
B V4.15 301D June Prod 03’
Symptom Corrected
Suffix
1. SC672 (controller start-up error).
2. NetWare printing error: The machine will not accept print jobs after a certain amount have been sent
via NetWare.
3. Words missing (French/Spanish): Some words not displayed in French (missing from wording lists).
4. Slow printing speed with Standard TCP/IP port.
IMPORTANT: To ensure the above symptoms do not occur, it is also necessary to update to the
following firmware versions or newer:
! BIOS: B0705742D: K02EL00O
! Controller: B0705734B: V.1.04.4
!
LCDC: B0705371B (NA): V.2.07
B0705372B (EU): V.2.07
Note: For details, refer to RTB RB070001.
B
1. Supports 0-counter change
2. Supports SMTP Authentication
Note: For details, refer to RTB RB070003.
B0705755
1. Not possible to access the NIB from SmartNetMonitor (IPX environments only).
2. Not possible to access the network when an NVRAM clear is performed with the IEEE1394
board installed.
3. The NIB is not able to limit access from the WebImageMonitor document server or
DeskTopBinder V2 Professional in accordance with the Access Control ranges specified in
WebImageMonitor (only when these settings have been specified).
4. Modified for use with the Copy Connector Kit.
A