Service manual

6. Install the following firmware

together as a set:

# NCS (NIB): (B0705755B) v.4.15

# Netfile: (B0705756B) v3.07.2

# System: (B0705754B) v4.01.4

# Webdoxbox: (B0705758B)

v1.08

Important

: The function will not work properly unless all versions above are

installed together.

7. After successfully installing the firmware above, turn the main switch OFF/ON.

8. Set SP5836-003 to a value of 1, which will enable the print back-up feature.

9. Set the following SP modes to the values shown:

SP No. Setting SP No. Setting

SP5-836 001 0 SP5-836 085 1

SP5-836 002 0 SP5-836 086 2

SP5-836 072 0 SP5-836 091 50

SP5-836 073 0

10. Set the following SP modes as necessary, in accordance with the customer’s

needs.

SP No. Setting Comments

SP5-836 094 2 Sets JPEG2000 (J2K) as the file format for documents

copied from the Document Server to Palm2.

Note: Files backed up to Palm2 in J2K format cannot be

edited by other software applications.

0 Sets TIFF as the file format for documents copied from the

Document Server to Palm2.

Note: Use this setting for customers who wish to use other

software applications to edit or apply OCR or other

processing to backed-up files, and who do not mind the loss

in image quality.

SP-5836 098 1 Applies a correction for dots, rear-side image catching and

background to files copied to Palm2, in order to minimize

the size of the file down to its essential parts.

Note: This is applied to both J2K and TIFF files, but is

particularly useful for customers who wish to copy J2K

documents quickly, as they are normally larger, and who do

not mind the slight loss in image reproduction.