Service manual

1-3
Preparation
Before you begin the installation procedure, you must first:
• Determine the distance between the machines to be connected.
• Determine whether the printer/scanner option is installed on the machines.
Measure the distance between the machines, then decide how many cables and
repeater hubs are required.
DISTANCE POWER REPEATER HUBS INTERFACE CABLES
Up to 4.5 m
(14.8 ft.)
None 1
4.5 ~ 9.0 m
(14.8 ~ 29.5 ft)
1 2
9.0 ~ 13.5 m
(29.5 ~ 112.5 ft.
2 3
Two sets of keytops (2 per set, 1 for NA, 1 for EU) are provided for each machine,
but you need to install only one keytop on each machine.
• Install the key labeled “Printer/Other Function” (or its equivalent symbol keytop
for EU) on a machine with the printer/scanner option installed
• Install the key labeled “Other Function” (or its equivalent symbol keytop for EU)
on a machine without the printer/scanner option.