Service manual

– 4 –
11. Insert one end of the interface cable [A] to the connection PCB inserted in slot A2.
12. If additional interface cables are required, connect the cables [B] with the repeater
hubs [C].
13. On the operation panel of both machines, remove the second cover (or Printer key)
from the bottom [D].
14. Install an appropriate key for each machine:
Attach the “Printer/Other Function” key [E] (or its equivalent symbol keytop for EU) if
the printer/scanner option is installed in the machine.
-or-
Attach the “Other Function” key [E] (or its equivalent symbol keytop for EU) if the
printer/scanner option is not installed in the machine.
15. Attach the other end of the connection cable to the connection PCB installed in the
other machine.
**********************************************************************************************
T03040804.WMF
[A]
[B]
[C]
[D]
[E]