Service manual

– 1 –
Preparation
Before you begin the installation procedure, you must first:
•
Determine the distance between the machines to be connected.
• Determine whether the printer/scanner option is installed on the machines.
• Measure the distance between the machines, then decide how many cables and
repeater hubs are required.
DISTANCE POWER REPEATER HUBS INTERFACE CABLES
Up to 4.5 m
(14.8 ft.)
None 1
4.5 ~ 9.0 m
(14.8 ~ 29.5 ft)
1 2
9.0 ~ 13.5 m
(29.5 ~ 112.5 ft.
2 3
Two sets of keytops (2 per set, 1 for NA, 1 for EU) are provided for each machine, but you
need to install only one keytop on each machine.
• Install the key labeled “Printer/Other Function” (or its equivalent symbol keytop for EU)
on a machine with the printer/scanner option installed
• Install the key labeled “Other Function” (or its equivalent symbol keytop for EU) on a
machine without the printer/scanner option.