Service manual

T echnical B ulletin
PAGE: 3/5
Model:
Bellini-C2 Date: 24-Apr-03 No.: RB070003
2. The SMTP Authentication modification
<< SP Modes for the SMTP Authentication>>
The following SP modes are added for SMTP authentication after updating to the firmware
versions listed above (5852-002 is an existing SP mode).
Important:
! Make sure to print out the NIB Summary Report
before
updating the firmware.
! Make sure to do the update with the procedure described below, which includes
manually inputting the defaults for the new SP modes
.
5852 SMTP Simple Mail Transfer Protocol. The
protocol for communication between
Internet main MTAs (Message Transfer
Agents)
002 Port Number Sets the port number
[1~65535 / 25 / 1]
003 Authorization Validates the SMTP function. SMTP
(Simple Mail Transfer Protocol) is the
protocol for communication between
Internet main MTAs (Message Transfer
Agents).
[ON/OFF]
ON： Enables SMTP
OFF： Disables SMTP
004 User Name Sets the SMTP user name.
005 Password Sets the SMTP password.
006 SMTP Auth. Encryption Sets encryption method for the transfer
password in SMTP validation.
[0~2 / 0 / 1]
0: Auto. Allows three methods for
encryption in SMTP validation:
LOGIN, PLAIN, or CRAM-MD5.
1: Off. Allows two methods for SMTP
validation: LOGIN, PLAIN.
2: On. Allows only one method for
SMTP validation: CRAM-MD5.