Service manual

Technical Bulletin PAGE: 1/3
Model: Bellini-C2 Date: 28-Dec-06 No.: RB070062
Subject: Patch Release for EB-105EX V.1.2 (Composite01) Prepared by: Chisato Tsuji
From: 2nd Tech Support Sec. Service Support Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Other ( )
This RTB is the release note for Composite Patch for EB-105EX printer controller System
V1.2.
1. Explanation about composite patch
1-1. About the set of composite patches.
G3538981.exe is a set of composite patches for EB-105EX, which consists of 3 patches
l 1-HASH8.ps
l 1-LV4GA.ps
l 1-N69ZD.ps
They should be used on EB-105EX system version 1.2.0.
[ 1-HASH8.ps ]
This is a patch, which will update the FPGA chip revision to Rev.20.
The FPGA chip should be updated to Rev.20 before applying the 1-LV4GA.ps.
If the FPGA chip revision is already Rev.20, then this patch is not needed.
[ 1-LV4GA.ps ]
This is a composite patch.
[ 1-N69ZD.ps ]
This is a patch, which will fix a bug in 1-LV4GA.ps
So, this patch should be applied after 1-LV4GA.ps.
1-2. What is fixed with the composite patch.
The following patches are actually included in the composite patch (1-LV4GA.ps)
1-FY60I WebTools 4.6.60/WebScan 1.1.42:Cannot retrieve multi-page tiff scanning jobs (the
"All" option is grayed-out).
1-GRRLM Every sheet is offset when a job is printed using the tab setting.
1-GYWYK When you Rip & Hold some multiple copy data to print, the printing process is never
completed
1-I3MIN When you print a job on Laser Soft (UNIX print Server) via PCL, SC919 happens.
1-HQ1N0 Archived job locks up printer queue, SC919 code result
1-HFWNQ The printing process is stopped after jam releasing
1-IN04O Some PCL media type commands do not work.
1-IKXIN When sending a specific PCL file, SC919 may happen.
1-JF30J When printing multiple copies of a job that uses the Interposer, sometimes some
pages are missing.
1-JF306 When repeating steps to add/delete Mixed Media settings to a job on CWS,
incorrect settings appear.
1-JDQ0D When you do overlay printing via W-ELP (software), SC919 happens.