Service manual

Technical Bulletin PAGE: 2/4
Model: Bellini-C2 Date: 10-Aug-06 No.: RB70060
Version Symptom Corrected
3. Words missing (French/Spanish): Some words not displayed in French (missing
from wording lists).
4. Slow printing speed with Standard TCP/IP port.
IMPORTANT: To ensure the above symptoms do not occur, it is also necessary to
update to the following firmware versions or newer:
l BIOS: B0705742D: K02EL00O
l NIC: B0705735B: V.4.03
l LCDC: B0705371B (NA): V.2.07
B0705372B (EU): V.2.07
l Note: For details, refer to RTB RB070001.Printer Document Server.
B0705754
1. Supports 0-counter change
2. Supports SMTP Authentication
Note: For details, refer to RTB RB070003
A 1. Modified for use with Copy Connector Kit.
2. SC997/SC998 occurs with frequent use of New Job.
3. The Printer function is given priority when the Copier is set as the priority
function.
4. Modified to further minimize multifeeds for certain paper types.
5. Paper is stacked in shift tray 2 when center stapling is disabled and the job
resumed following a center staple End condition.
B 1. Modified for use with the MLB option (File Format Converter).
2. New default value for SP5-836-098 (Back Projection Removal): 1
3. “Please Wait” display does not clear when turning the power ON after installing a
new HDD.
4. “Please Wait” display does not clear during warm-up.
5. Key sound and subsequent screen change for Designate key is slow.
6. Incorrect PM interval: cleaning blade, cleaning brush, feed roller, fusing roller
cleaning felt (EU).
7. If the finisher tray reaches capacity at the completion of a New Job, the next New
Job in the queue will not start, even when the copies are removed from the tray.
8. New Jobs cannot be programmed up to specification maximum on either the
main or sub Copy Connection machines.
9. It was possible to clear SC861 (HDD failure) with the operation switch.
10. Copy Connection: Job may not be performed correctly if initiated while the sub
machine is in Night Mode.
11. SC818 sometimes occurs on one Copy Connection machine if the power is
turned off on the other machine while both contain New Jobs filled up to
capacity.
12. Thumbnails are not created for some files when storing/capturing 2500 Printer
files into the Document Server at once.
13. SC995 sometimes occurs with large-volume printer jobs or when the machine
receives simultaneous job requests from multiple machine functions.