Service manual

T echnical B ulletin
PAGE: 1/1
Model:
Martini-C2 Date: 6-Jan-05 No.: RB140024
Subject: Information on using the finishers with MT-C2 Prepared by: S. Watanabe
From: 2nd Tech Support Sec. Service Support Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety Other ( )
Important Note on using the finishers with MT-C2 models
The table below shows the finishers that can be used with the MT-C2.
Items Code
Model
MT-C2
Model
MT-C1
Model
B-C2E
3,000 sheets Finisher with
50 sheets stapler (SR850)
(*1)
B469
Yes
(*2)
Yes N/A
3,000 sheets Finisher with
100 sheets stapler (SR840)
B478
N/A
Yes N/A
3,000 sheets Finisher with
100 sheets stapler (SR841)
B706 Yes
(*3)
N/A Yes
3,000 sheets Booklet Finisher with
50 sheets stapler (SR860)
B468 N/A Yes Yes
(*4)
3,000 sheets Booklet Finisher with
50 sheets stapler (SR861) (*1)
B674
Yes
Yes N/A
Z-folding unit B660
Yes
(With
SR861)
N/A
Yes
(With
SR841)
Yes: Can be attached to this machine.
N/A: Cannot be attached to this machine.
(*1) Compatible Finisher for MT-C1 and MT-C2
(*2) SR850 Finishers produced from January 2004 support the print speed of the
MT-C2a (51cpm) and MT-C2b (60cpm). (Please refer to RTB #RB140022.)
(*3) SR841 Finishers produced from August 2004 support the print speed of the
MT-C2a (51cpm) and MT-C2b (60cpm). (Please refer to RTB #RB140014.)
(*4) Can be attached to the 90cpm model.