Service manual

T echnical B ulletin
PAGE: 1/2
Model:
Bellini-C2 Date: 18-Oct-04 No.: RB070050
Subject: SR850, SR860 Stapler Harness Damage Prepared by: M. Matsuda
From: 2nd Tech Support Sec. Service Support Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Other ( )
SYMPTOM
The outside of the stapler harness is damaged in the area shown in the photo. In some
cases, a short circuit occurs in the damaged area.
CAUSE
The stapler harness rubs against the finisher rear plate when the stapler unit is pulled out
or pushed in.