Service manual

T echnical B ulletin
PAGE: 7/15
Reissued: 15-Apr-05
Model:
General RTB
Date:
15-Nov-04
No.:
RGene019a
6. Enter "get version.txt -" to check the machine's firmware version.
f
200 PORT command successful.
150 Opening ASCII mode data connection for 'version.txt'.
PartNo. Module Name Version Module ID
----------------------------------------------------------------------------------------------
G0000000 os & copy 0.20 XXXXXX_copy
G0000000 os & pf 0.20 XXXXXX_system
G570xxxx Onboard Scn 2.04 XXXXXX_scn
G5705387A OptDIMM Fax 1.07 XXXXXX_fax
G5700000 printer 0.19 XXXXXX_printer
G5705383D Network DocBox 2.00 XXXXXX_netfile
G0805920A Network 0.71 XXXXXX_net
G0805601 ENGINE R0.14 :06 XXXXXX_eplot
...
----------------------------------------------------------------------------------------------
226 Transfer complete.
ftp>
7. Enter "binary" to set the file transfer mode to binary.
ftp> binary
200 Type set to I.
ftp>
8. Navigate to the directory on your PC containing the file xxx.rru.
9. Transmit the firmware module file (*.rru or *.rfu) using the "put" command.
ftp> put xxx.rru
200 PORT command successful.
150 Opening BINARY mode data connection for 'xxx.rru'.
226 Transfer complete.
ftp:nnnnnn bytes sent in s.ss Seconds pp.pp Kbytes/sec.
ftp>
Note: Do not turn off the power of the machine while updating the firmware.