Service manual

T echnical B ulletin
PAGE: 1/1
Model:
Bellini-C2 Date: 14-May-04 No.: RB070042
Subject:
Patch Release for EB-105EX (1-CX7BV)
Prepared by: Chisato Tsuji
From: 1st Tech. Support Sec. Service Support Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Other ( )
This is a release note for a patch file for printer controller EB-105EX.
Patch File Issue(s)
1-CX7BV
•
When the Fuser Cleaning Web becomes near empty, the controller
cannot start to print a job.
Note: This patch is for EB-105EX system version 1.01.
Please make sure that patches “1-AKVJG” and “1-9ZUYT” have already been applied to
System version 1.01 before installing this new patch.
Patch Procedure for 1-9ZUYT:
1. Download the patch file (1-CX7BV.ps) to the Print queue by using the “Fiery
Downloader”.
2. Wait at least 60 seconds (this is very important
).
3. Reboot the system.
(Access the Fiery menu, select “Shut Down” and then “Reboot System”.)
4. Once the EB-105EX becomes idle, print out the configuration sheet.
5. Check to make sure that the patch number “1-CX7BV.ps” appears in the
Update Information section on the configuration sheet.