Service manual

T echnical B ulletin
PAGE: 1/1
Model:
Bellini-C2 Date: 28-Apr-04 No.: RB070039
Subject: Firmware Update Remarks Prepared by: M. Matsuda
From: 2nd Tech Support Sec. Service Support Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Other ( )
Important Notes Regarding Firmware Installation for the Bellini-C2e
As detailed in RTB RB070038, the Bellini-C2e is an enhanced version of the Bellini-C2,
and requires an update to all the firmware versions listed below.
Please Note:
•
When updating a Bellini-C2 field machine to the Bellini-C2e, update to
all of the
following firmware versions together as a set
.
- Use the following procedure to update to the Bellini-C2e:
1. First, install the ”System” firmware only.
2. After successfully installing the “System” firmware, turn the machine main power
Off/On and confirm that the machine boots up to Ready status normally.
3. Install the remaining firmware simultaneously.
• Change the value for SP5165-001 to 008 to 2.5(NA), 2.0(EU)
Firmware for the Bellini-C2E
Software Software P/N Version
System B0705774 V5.04.2
NCS (NIB) B0705775 V4.51
Netfile B0705776 V4.00
Websystem B0705777 V2.04
Webdocbox B0705778 V2.03
LCDC (NA or EU) B0705374B (NA) or
B0705375B (EU)
V2.18
Language B0705350B V3.10
BCU (Engine) B0705254D V5.14:34
Printer B5806516 V2.07
Scanner B5806521 V3.02