Service manual

T echnical B ulletin
PAGE: 14/15
Model:
Bellini-C2 Date: 4-Feb-04 No.: RB070038
Details
Stapling Z-Folded Paper
Here is the operation sequence for jogging and stapling Z-folded sheets:
①
①①
①
The lower jogger fence lifts to receive the Z-folded sheets.
②
②②
②
The top fence moves down, to the horizontal position.
③
③③
③
A sheet of paper goes into the stapler tray.
④
④④
④
The positioning roller turns when each sheet is fed to the stapler tray.
⑤
⑤⑤
⑤
Each sheet is fed down against the lower jogger fence to align the bottom edge.
⑥
⑥⑥
⑥
After the set number of sheets come in, the jogger top-fence motor switches on and
lowers the top fence against the top of the stack. This aligns the stack for stapling.
⑦
⑦⑦
⑦
The bottom fence motor lowers the aligned stack to the stapling position.
⑧
⑧⑧
⑧
The stapler staples the stack.
B674D004.WMF
B674D005.WMF
⑦
⑦
⑦
⑦
⑥
⑥⑥
⑥
⑧
⑧⑧
⑧