Service manual

T echnical B ulletin
PAGE: 3/8
Model:
Bellini-C2 Date: 21-Apr-03 No.: RB070002
4-3 Features of the Service SD Card
The following are the features for the Service SD card at the time this document was issued.
Please refer to the Service Manual for the detailed procedures on how to update the firmware
or retrieve the data from the machine.
Feature Description Remarks
1 Firmware
update
• Firmware upgrade or downgrade.
•
Firmware for any supported product can
be stored in the card.
•
The machine automatically scans the
content of the card and can recognize
what model the firmware is for. The
machine will only download firmware for
the same model as itself.
Please refer to
section 4-4 below
for guidelines on
how to store the
firmware and data in
the SD card.
Firmware cannot be
uploaded from the
machine to the SD
card.
2 Data upload
and download
The following data can be transferred
between the NVRAM and the SD card:
•
SP data (such as factory settings)
• Logging Data
•
User settings (e.g. network, fax and mail
addresses).
Transferable data
can vary from
product to product.
Please refer to the
Service Manual for
each model for
details.
3. Debug log The machine operation log can be captured
when a problem (e.g. SC codes, paper
jams) occurs. This data is very useful in
determining the cause of a problem.
New SP modes have been added to capture
the debug log data to the HDD or SD card.
4. Card Save
Print data (files) can be stored directly to the
SD card without printing out.
4-4 Storing Firmware and Data in the SD Card
(1) Firmware (folder name: romdata):
When the SD card is inserted into the machine slot for firmware update, the machine
automatically scans the firmware in the “romdata” folder and checks the firmware headers,
which indicate the model. If the model is the same as the machine, the transfer is authorized.
NOTE:
The firmware should always be in the “romdata” folder. If not, the machine cannot find the
firmware.