Service manual

T echnical B ulletin
PAGE: 2/3
Model:
Bellini-C2 Date: 26-Nov-03 No.: RB070033
Symptom Corrected
Suffix
1. Modified for use with Copy Connector Kit.
2. SC997/SC998 occurs with frequent use of New Job.
3. The Printer function is given priority when the Copier is set as the priority function.
4. Modified to further minimize multifeeds for certain paper types.
5. Paper is stacked in shift tray 2 when center stapling is disabled and the job resumed following
a center staple End condition.
A
1. Modified for use with the MLB option (File Format Converter).
2. New default value for SP5-836-098 (Back Projection Removal): 1
3. “Please Wait” display does not clear when turning the power ON after installing a new HDD.
4. “Please Wait” display does not clear during warm-up.
5. Key sound and subsequent screen change for Designate key is slow.
6. Incorrect PM interval: cleaning blade, cleaning brush, feed roller, fusing roller cleaning felt
(EU).
7. If the finisher tray reaches capacity at the completion of a New Job, the next New Job in the
queue will not start, even when the copies are removed from the tray.
8. New Jobs cannot be programmed up to specification maximum on either the main or sub
Copy Connection machines.
9. It was possible to clear SC861 (HDD failure) with the operation switch.
10. Copy Connection: Job may not be performed correctly if initiated while the sub machine is
in Night Mode.
11. SC818 sometimes occurs on one Copy Connection machine if the power is turned off on
the other machine while both contain New Jobs filled up to capacity.
12. Thumbnails are not created for some files when storing/capturing 2500 Printer files into the
Document Server at once.
13. SC995 sometimes occurs with large-volume printer jobs or when the machine receives
simultaneous job requests from multiple machine functions.
14. Image is not printed out correctly if Interrupt Copy is used while printing out a Document
Server file.
Specification change:
Estimated job completion times added to New Job table for the Printer function.
B
1. Modified for use with the EB-105EX controller (EFI).
2. Error in storing debug log data when the function is set for engine log storage (2224) of
paper jams.
C
1. Modified for simultaneous use of the EB-105EX with Desk Top Editor for Production.
2. The image is sometimes positioned incorrectly when printing a file from the Document
Server to custom-sized paper using Double Copies and Centering/Cornering.
3. 32k bytes of a scanned image is sometimes lost on the trailing edge.
4. The image is sometimes printed in the wrong orientation when Reserve Job is set to
“Previous Job” and the paper type for the selected tray is set to “Tab Stock”.
5. The “Please Wait” display does not clear if the HDD installed is defective.
6. SC819 sometimes occurs with Copier Connector mode.
7. 1200dpi image data sometimes does not appear correctly after being transferred from the
MFP hard drive to Desk Top Editor for Production (or vice-versa).
IMPORTANT: To ensure the above do not occur, it is also necessary to update to the following firmware
versions or newer:
! Netfile V.3.08 ( B0705756D)
D