Operating instructions

&RPELQHG)XQFWLRQ2SHUDWLRQV
28

6DYLQJ(QHUJ\
-
--
-Low Power Mode
If you do not operate the machine for a specified period of time after an opera-
tion, or when you press the {
{{
{
(QHUJ\6DYHU
}
}}
} key, the display disappears and the
machine goes into Low Power mode. When you press the {
{{
{
(QHUJ\6DYHU
}
}}
} key
again, the machine returns to the “Ready” status. In Low Power mode, the ma-
chine uses less electricity.
1RWH
❒
You can change the Panel Off Timer. See p.67 “Panel Off Timer”.
-
--
-System Reset
The machine automatically returns to its initial condition when a job is finished,
after a specified period of time. This function is called “System Reset”.
1RWH
❒
You can change the System Reset Timer. See p.67 “System Auto Reset Timer”.
-
--
-Auto Off
The machine automatically turns itself off after a job is finished, after a specified
period of time. This function is called “Auto Off”.
1RWH
❒
You can change the Auto Off Timer. See p.66 “Auto Off Timer”.
❒
Auto Off Timer will not operate in the following cases:
• When a warning message appears
• When the service call message appears
• When paper is jammed
• When the cover is open
• When the “Adding Toner” message appears
• When toner is being added
• When the User Tools or Counter screen is displayed
• When fixed warm-up is in progress
• When printer or other functions are operating