Operating instructions

Using the Operation Panel
40
4
11Print Priority
(setting the multi-accessing
function)
Sets the print priority for each mode.
•“Copier”
Print priority is given to the copy function.
•“Fax”
Print priority is given to the fax function.
•“Printer”
Print priority is given to the printer function.
•“Interleave”
Prints jobs in the order in which they are initiated regardless of
mode/function.
•“Display”
Print priority is given to the mode displayed on the display.
Note
❒ Default: Copier
Reference
See “Multi-access” in the System Sttings manual.
13Key Operators Tools
(13Key Op. Tools)
Used to view or print counters, and set up user codes. If you have
registered the access code and set“3.Key Op. Access”to “On”, you
cannot use this function unless entering the correct code.
Reference
“4.Prog. Key Op. Code” and “3.Key Op. Access”.
1.Show Counter View counter values on the panel display.
• Total Pages
• Printer (for machines with optional printer function)
•Copier
• Fax (for machines with optional fax function)
• A3 size
• 2Sided Prints (Type 3 only)
2.Print Counter Print counter lists.
Limitation
❒ 15 ppm model requires the optional 16MB copier memory unit
when using this function.
3 Key Operator Access
(3.Key Op. Access)
Turn the key operator access code “On” or “Off”. If you select
“On”, the registered access code is required for using all applica-
tions.
Note
❒ Default: Off
Reference
See “4.Prog. Key Op. Code”
Menu Description