Installation & Assembly
We reserves the right to change, update, modify, alter, redesign this manual/product or its policies without prior notice!
It is your responsibility to visit website to download or contact customer service for the most updated version of the installation instructions.
We shall not be liable for any injuries or property damages in connection with this product during installation or use of this product!
1. Test fit sink in newly created opening.
2. Check that entire sink weight is supported by support frame.
3. Verify that sink is in line and level with top of cabinet.
4. If necessary, use shims to level sink.
5. Set sink. Using sealant, fill gaps below sink front and between sink and countertop.
6. Hold sink in place to secure and position countertop on sink.
7. Remove excess sealant from all surfaces.
Fireclay sinks are made of clay fired at over 1,400°F, which causes clay to become stonelike. This produces a strong and durable materi-
al resistant to scratching, staining, fading and discoloration.
To clean, use a soft, non-abrasive sponge or a cleaning cloth. Add mild soap and warm water or a gentle all-purpose cleaner. Wipe
surface dry with a clean, soft cloth after each use. For tough stains, use non-abrasive liquid or cream bathroom cleaner.
Refrain from soaking dishes for long periods of time, and do not leave coee grounds or teabags in sink. These may otherwise cause
potential stains or damage to finish.
VI. Final Sink Placement
VI. About Fireclay and Care