User's Manual

Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide
9
1.
Connect SaviTag Write Cable STA-1030 to an available serial port
on the host computer.
2. Locate the tag commissioning port on the Savi ST-696-001 ISO
Container Door Tag.
3. Unplug the rubber cap covering the port.
4. Insert SaviTag Write Cable STA-1030, with the LED up, into the Tag
ST-696-001 commissioning port. Start the tag commissioning
application. The LED is lit when the application writes data to the tag.