User's Manual

Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide

About Savi Sensor Tag

ST-696-001 ISO

ontainer

Door Tag

Savi® Tag ST-696-001 ISO Container Door Tag with GPS/GPRS and Sensors is a high performance active RFID tag

that works with Savi software to track and

monitor the security status of containers as they move through the global

supply chain. This device is fully compatible with fixed and portable Savi readers and features up to 300 feet (91.44

meters) of omni-directional line-of-sight range. In addition, ST-696-001 Tag utilizes GPS receiver to report and

recorded asset location using GSM/GPRS cellular network.

Rechargeable Lithium Ion battery life is typically 90 days between the charges. The ST-696-001 tag is available with

128K of programmable memory. It includes a door clamp and external antennas. Using the door clamp, you affix the

tag to the left door of an ISO-compliant container.

Note: Savi Tag ST-696-001 ISO Container Door Tag only supports ISO 668: 1995(E) Series 1 freight containers.

Features

◆ 433 MHz, active RFID technology with up to 300-foot (91.44-meter)

range for monitor, wake-up, RF write/read

◆ 123 KHz receiver for slot level, portal, or chokepoint tag wake-up and

short range commissioning (12 feet [3.7 meters] or less)

◆ GSP Receiver for asset real time location

◆ GSM/GPRS modem for worldwide communication to cellular networks

◆ Small form factor, ideally suited for shipping containers

◆ Rugged, weatherproof design

◆ Powered by a rechargeable Lithium Ion battery

◆ Intrusion detection sensors monitor door and light status

◆ Expandable sensor port connects to third-party sensor equipment

◆ Temperature, humidity, and shock sensors monitor the internal

environment of a container

◆ 128

KB nonvolatile memory for logging GPS location coordinates and sensor data