User's Manual

Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide
12
4.
Move the door sensor to the left and ensure that the
lever is fully extended before closing the container
door. This is a side view of the device mounted on the left
door. This is a view of the outside of the container
5. Close the right door. This is a view of the tag on the container with both
doors closed.
6. Seal the tag using the software on your mobile device. The door sensor
recognizes when the right door is closed and when the container is
dark.
7. After successfully sealing the tag, insert the container’s bolt into the
hasp.