User Manual

CHAPTER 1
Savi SensorTag ST-676-I ISO Container Door Tag with Sensors Installation Guide 5
About Savi SensorTag
ST-676-I ISO Container
Door Tag with Sensors 1
Savi® SensorTag ST-676-I ISO Container Door Tag with Sensors is a high
performance active RFID tag that works with Savi software to track and
monitor the security status of containers as they move through the global
supply chain. This device is fully compatible with fixed and portable Savi
readers and features up to 300 feet (91.44 meters) of omni-directional
line-of-sight range. Lithium battery life is typically four years. The ST-676-
I tag is available with 128K of programmable memory. It includes a door
clamp and external antennas. Using the door clamp, you affix the tag to the
left door of an ISO-compliant container.
Note: Savi SensorTag ST-676-I ISO Container Door Tag with Sensors only
supports ISO 668: 1995(E) Series 1 freight containers.
Features
◆ 433 MHz, active RFID technology with up to 300-foot (91.44-meter)
range for monitor, wake-up, RF write/read
◆ 123 KHz receiver for slot level, portal, or chokepoint tag wake-up and
short range commissioning (12 feet [3.7 meters] or less)
◆ Small form factor, ideally suited for shipping containers
◆ Rugged, weatherproof design
◆ Powered by a lithium battery
◆ Intrusion detection sensors monitor door and light status
◆ Expandable sensor port connects to third-party sensor equipment
◆ Temperature, humidity, and shock sensors monitor the internal
environment of a container
◆ 32K sensor memory