User Manual

Installing Savi SensorTag ST-676-I ISO Container Door Tag with Sensors
10 Savi SensorTag ST-676-I ISO Container Door Tag with Sensors Installation Guide
1. Connect SaviTag Write Cable STA-1030 to an available serial port on
the host computer.
2. Locate the tag
commissioning port on the
Savi SensorTag ST-676-I
ISO Container Door Tag
with Sensors.
3. Unplug the rubber cap
covering the port.
4. Insert SaviTag Write Cable
STA-1030, with the LED
up, into the Savi SensorTag
ST-676-I ISO Container
Door Tag with Sensors
commissioning port. Start
the tag commissioning
application. The LED is lit
when the application writes
data to the tag.
Port
LED
visible