User Manual

Replacing the Battery
Savi ST-656-I ISO Container Door Tag Installation Guide 11
Replacing the Battery
Savi ST-656-I ISO Container Door Tag is equipped with non-volatile
memory, which means stored data is not lost when you replace the battery.
1. Using a coin or flat-head
screwdriver, turn the battery
cover counterclockwise.
When removing the battery
cover, hold on to it to avoid
dropping it.
2. Remove the discharged battery from its compartment.
Warning: The lithium battery can be harmful to the environment.
Follow current procedures for safely disposing of lithium batteries.
3.
Install an A 3.6V lithium
battery, matching the negative
(–) and positive (+) terminals
to the symbols shown on the
tag housing. The tag will not
work if you install the battery
in the wrong direction
(reversed).