User Manual

ST-675-SIAD-001 Tag
Mounting Guidelines
805-00008-901 Rev 01 sheet 9 of 11
MOUNTING GUIDELINES, ST-675-SIAD-001 TAG
3 Installation of Tag
The tag's mounting method is designed to be installed once for the duration of the containers
service. The modified ST-675 tag can then be attached and removed rapidly for efficient
tracking. There are several varying models of refrigeration containers, as such; various
component placements will be employed. The following sequence should be followed for each
new container model:
1. Determine best tag location
2. Surface Preparation
3. Tag installation
3.1 Determine Best Tag Location
The tag shall always be mounted on the left container door. The tag can be mounted anywhere
along the edge, however mid door is most common. The location should be clear of any
obstruction or damage.