User's Manual Part 2

CHAPTER 2 Installing the Tag
18 Savi SensorTag ST-674 Installation Guide
5. Insert the tag into the sleeve
and insert a wire loop or
nylon tie-wrap through the
two retaining ears. No tape
curing time is required prior
to installing the tag.
The mounting sleeve is
equipped with a tie-wrap
groove to ensure that
Savi
SensorTag ST-674
is
securely fastened.
6. To prevent the tag from
dislodging from the tag
mounting sleeve as a result
of sudden impact or
extreme shocks, insert the
supplied tie-wrap through
the sleeve.
Tie-wrap groove