User's Manual Part 1

CHAPTER 2
Savi SensorTag ST-674 Installation Guide 9
Installing the Tag 2
Required Tools and Materials
Before you begin installation of the Savi SensorTag ST-674, make sure you
have the following materials available:
◆ Savi SensorTag ST-674
◆ Savi SmartChain for Mobile Devices installed on an Intermec 751G/A
mobile computer with an attached Savi Mobile Reader SMR-650-212
Commissioning a Tag
Savi SensorTag ST-674 is shipped from the factory in sleep mode. Before
you attempt to commission a tag, refer to Guide to Savi SmartChain for
Mobile Devices to wake the tag.
Note: You can also remove and re-insert the battery to wake up the tag.
You must wait a few seconds before re-inserting the battery.
You can commission Savi SensorTag ST-674 using Savi Tag Write Cable
STA-1030, Savi Tag Write Cable Adapter STA-1031, or docking station
with a docking station adapter model SDSA-654-01. You can purchase
these units separately.