User's Manual Part 3

CHAPTER 2 Installing the Tag
22 Savi SensorTag ST-673 Installation Guide
13.On the inside of the
container, replace the small
rubber gasket washer and
screw the nut on the
mounting sleeve to secure
the tag. Close the jet engine
container.
14.If the orifice of the
container is too large for the
tag to be mounted securely,
insert a metal shoulder
washer before replacing the
rubber washer and nut.
Ensure that the lip on the
metal shoulder washer is
inserted through the orifice
and is facing the outside of
the container.
The metal shoulder washer
must be ordered separately.
Mounted tag