User's Manual Part 3

Mounting Savi SensorTag ST-673
Savi SensorTag ST-673 Installation Guide 19
5. To prevent the tag from
dislodging from the tag
mounting sleeve as a result
of sudden impact or
extreme shocks, use the
supplied stainless steel
screws and washers through
the sleeve.
6. Ensure that you can see the
sensor filter through the
hole on the back of the
mounting sleeve.
7. Carefully remove the red
protective film covering
from the PST on the back of
the sleeve. Avoid touching
the PST adhesive.
Use supplied screws to washers to
secure the tag to the sleeve