User's Manual Part 1

CHAPTER 2
Savi SensorTag ST-673 Installation Guide 9
Installing the Tag 2
Required Tools and Materials
Before you begin installation of the Savi SensorTag ST-673, make sure you
have the following materials available:
◆ Savi SensorTag ST-673
◆ Savi SmartChain for Mobile Devices installed on an Intermec 751G/A
mobile computer with an attached Savi Mobile Reader SMR-650-212
Removing the Mounting Sleeve
You must remove the metal mounting sleeve before you can commission
and install a tag.
1. Remove the stainless steel
screws from the mounting
sleeve.
Screws and washers