User's Manual Part 1

Commissioning a Tag
Savi SensorTag ST-673 Installation Guide 11
Commissioning the Tag with a Tag Write Cable
or Tag Write Cable Adapter
1. Connect Savi Tag Write Cable STA-1030 or Savi Tag Write Cable
Adapter STA-1031 to an available serial port on the host computer.
2. Locate the tag
commissioning port on
the tag.
3. Unplug the rubber cap
covering the port.
4. Insert Savi Tag Write Cable
STA-1030 or Savi Tag
Write Cable Adapter
STA-1031, with the LED
up, into the tag
commissioning port. Start
the tag commissioning
application. The LED is lit
when the application writes
data to the tag.
LED visible