User's Manual

Page 4 of 6

WML-C40##_User_Manual

Feb. 13. 2006

COMMERCIAL IN CONFIDENCE

This material may not in whole or part be copied, stored electronically or communicated to third parties

without MITSUMI ELECTRIC CO., LTD’s prior agreement in writing.

Not Authorized modification could void authority to use this equipment.

3.1 Labelling.

MITSUMI module WML-40## labelled as below.

Module internal Antenna

FCC Regulatory information. OEM devise should contain labelling that:

Approved in accordance to FCC rules transmitter module marked by FCC-ID POOWML-C40 label,

manufactured by MITSUMI incorporated to OEM product. When its not possible, in user manual

should be included such information.

For example :

“This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may cause

undesired operation.” This device contains

FCC-ID POOWML-C40

The modules can be integrated in the following ways:

a) if the minimum distance 2,5 cm between the antenna and the body of theuser or nearby persons is

ensured, so a statement in the users manual forend product is not necessary, and product where this

module incorporated can be used as portable application.

b) In case that the distance 2,5 cm between the antenna and the body ofthe user or nearby

persons cannot be ensured, the users manual of the endproduct in which the module will be integrated

has to inform the user about a minimum distance of 20 cm between the equipment and the body if the

equipment is considered for mobile application

MITSUMI

Company Logo

Module’s Serial

umbe