User Manual

Savi ST-618 Asset Tag Installation Guide
6
Features
• ISO 18000-7 compliant active RFID asset tag
• 2 Kbytes of memory for recording asset configuration and
mai
ntenance data
• 400-foot (122m) range for wake-up, collections, and RF write/read
op
erations
• Replaceable battery with typical life
of five years
• FCC, HERO, ETSI, RoHS (Directive 2002/95/EC) certified
Activating the Tag
The tag is shipped in sleep mode. You must remove and re-insert the
battery to wake up the tag. After you re-insert the battery, you can
initialize the tag.
1. Remove the battery cap.
Turn cap to open
Remove battery as shipped
2. Remove the battery. Wait a few seconds and then reinsert the battery,
matching the negative (–) and positive (+) terminals to the symbols