User Manual

Savi ST-621 License Plate Tag Installation Guide
6
Features
• ISO 18000-7 compliant active RFID data-rich tag
• 400-foot (122 meters) omnidirectional line-of-sight range for
mo
nitoring, waking-up, and RF write/read operations
• Replaceable battery with a typical
life of five years
• FCC, HERO, ETSI, RoHS (Directive 2002/95/EC) certified
Activating the Tag
The tag is shipped in sleep mode. You must remove and re-insert the
battery to wake up the tag. After you re-insert the battery, you can
initialize the tag.
1. Remove the battery cap.
Turn cap to open
Remove battery as shipped
2. Remove the battery. Wait a few seconds and then reinsert the battery,
matching the negative (–) and positive (+) terminals to the symbols
shown on the tag housing. The tag will not work if you install the
battery in the wrong direction (reversed).