User Manual
&+$37(5
,QVWDOOLQJ6DYL7DJ67
0RXQWLQJ6DYL7DJ678VLQJ3UHVVXUH
6HQVLWLYH7DSH
If it is not possible or practical to use screws or rivets, you can use pressure
sensitive tape (PST) to attach a SaviTag ST-654. The only brand of PST
that Savi Technology recommends for mounting SaviTags is
3M Corporation’s Automotive Acrylic Plus Attachment Tape.
For ease of installation, during manufacturing Savi installs this PST on the
back of the plastic mounting sleeve. PST mounting kits are also available
for separate purchase.
)LJXUH 6DYL7DJ67IDFWRU\LQVWDOOHG 367
Once a mounting sleeve is fastened to an asset, you can leave it on the asset
even after SaviTag ST-654 is removed so it is available for future use with
other compatible SaviTags. Prior to re-use, visually inspect the
PST-mounted sleeve to make sure it is attached securely. If necessary,
reinstall the sleeve using new PST.
3675HOLDELOLW\DQG'XUDELOLW\
3M Corporation has conducted extensive environmental testing on their
Automotive Acrylic Plus Attachment Tape. In addition, Savi has conducted
its own independent environmental tests of PST using SaviTag ST-410 as a
test platform. The U.S. Army (Tobyhanna Army Depot) has also tested PST
for use on surfaces treated with Chemical Agent Resistant Coating (CARC).
All these tests confirm that PST is an appropriate choice for mounting
SaviTags.