Installation Guide

&+$37(5 ,QVWDOOLQJ6DYL7DJ67

0RXQWLQJ6DYL7DJ67
You can choose among several mounting methods for SaviTag ST-654,
including using pressure sensitive tape, rivets, or a plastic mounting sleeve.
Whichever mounting method you select, the goal is to prevent accidental
loss of the tag by sudden impact, vibration, or shock during transport. The
fastener you choose often depends on the material from which the asset or
container is constructed and your personal preference.
SaviTag ST-654 includes these recommended mounting fasteners:
◆ Rivets
◆ Pressure sensitive tape (PST)
You can also use the following alternative fastening methods:
◆ Velcro, 3M SJ3550 Dual Lock Reclosable Fastener, 1 inch wide
◆ Tie-wraps
◆ Twine
◆ Screws
&DXWLRQ 8VHWKHVHDQGRWKHUDOWHUQDWLYHPHWKRGVDW\RXURZQULVN
0RXQWLQJ6DYL7DJ678VLQJ3UHVVXUH
6HQVLWLYH7DSH
If it is not possible or practical to use screws or rivets, you can use pressure
sensitive tape (PST) to attach a SaviTag ST-654. The only brand of PST
that Savi Technology recommends for mounting SaviTags is
3M Corporation’s Automotive Acrylic Plus Attachment Tape.
For ease of installation, during manufacturing Savi installs this PST on the
back of the plastic mounting sleeve. PST mounting kits are also available
for separate purchase.