User's Manual

CHAPTER 2

Designating Locations and Connecting Cables

26 Savi Fixed Reader SR-650-101 Installation Guide

c. After the ID display, the reader’s default IP address appears in the

LED display.

Savi fixed reader IP address 10.7.19.11 displays: IP, then =, then 10,

then 7, then 19, and then 11 in sequence.

Note:

Upon changing the reader’s default IP address, the reader’s

new IP address appears in the LED display. To change the reader’s

IP address, see “Adding and Configuring the Reader in SmartChain

Site Manager” on page 29.

The final state of the indicator displays a dot and a blinking dash.

2. If at any time you are not sure that the Savi fixed reader is operating

properly, reset the reader by disconnecting and then reconnecting the

power source.

After resetting the Savi Fixed Reader SR-650-101, it should repeat the

power-on sequence described above.

The Savi fixed reader is now ready for you to verify communication

functions.

Note:

The Savi Fixed Reader SR-650-101 has a watchdog sensor

that automatically resets the reader if power fluctuations or other

interruptions occur that might affect the reader’s performance.